Leaflets

5-fold slatted floor 60/16

The 5-Fold Slatted Floor 60/16 is ideal for calves and young cattle. It is suitable for rubber overlays and allows for the combination of different slot widths. Manufactured according to DIN EN 12737, it offers a concrete strength of C 40/50. Easy installation and a load capacity of 825 kg animal weight make it a reliable solution in animal housing. The slatted floor is chamfered in the edge area.

Calves slatted floor 50/10 Type KMG 35/30

The Calf Slatted Floor 50/10 Type KMG 35/30 is designed for calves and young cattle. It is manufactured according to DIN EN 12737 and offers a concrete strength of C 40/50. Features include easy installation and a load capacity of up to 350 kg animal weight. A reinforced version is available upon request.

Calves slatted floor 50/10 Type K 25

The Calf Slatted Floor 50/10 Type K 25 is designed for calves and young cattle. Manufactured according to DIN EN 12737, it offers a concrete strength of C 40/50. Features include easy installation and a load capacity of up to 350 kg animal weight. A reinforced version is available upon request. The slatted floor is chamfered in the edge area.

3-fold slatted floor 50/16

The 3-Fold Slatted Floor 50/16 is designed for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high stability, it supports animal weights up to 825 kg. It is available for a total weight of up to 6 tons (up to length 370 cm, corresponding to 3 tons axle load), with a track width of 2.0 m and a wheel contact area of 0.30 x 0.20 m. Plastic spacers between the individual elements and a step width of 13.1 cm ensure high slip resistance.

3-fold slatted floor 50/20

The 3-Fold Slatted Floor 50/20 offers easy installation and is manufactured according to DIN EN 12737. It has a concrete strength of C 40/50 and supports animal weights up to 825 kg. It is available for a total weight of up to 8 tons (up to length 400 cm, corresponding to 5 tons axle load). With a step width of 13.1 cm, it ensures high slip resistance.

4-fold slatted floor 60/16

The 4-Fold Slatted Floor 60/16 is designed for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and chamfered edges, it ensures high stability. The floor supports animal weights up to 825 kg and is loadable up to a total weight of 6 tons (corresponding to 3 tons axle load). With a height of 16 cm, it is suitable for rubber overlays. For drivable elements: track width 2.0 m, wheel contact area 0.30 x 0.20 m.

4-fold slatted floor 60/18

The 4-Fold Slatted Floor 60/18 is designed for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and chamfered edges, it ensures high stability. The floor supports animal weights up to 825 kg. It is suitable for rubber overlays. For drivable elements: track width 2.0 m, wheel contact area 0.30 x 0.20 m.

5-fold slatted floor 60/16

The 5-Fold Slatted Floor 60/16 is suitable for calves and young cattle. It is compatible with rubber overlays and allows for the combination of different slot widths. Manufactured according to DIN EN 12737, it offers a concrete strength of C 40/50. Easy installation and a load capacity of 825 kg make it a reliable solution. The slatted floor is chamfered in the edge area.

Twin slatted floor 32/16

The Twin Slatted Floor 32/16 is suitable for young and large cattle and complies with the current animal welfare guidelines. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high safety, it supports animal weights up to 825 kg. The slatted floor is claw-friendly, clean, and chamfered in the edge area. The load capacity is up to 6 tons total weight (corresponding to 3 tons axle load) with a height of 16 cm.

Twin slatted floor 35/16

The Twin Slatted Floor 35/16 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high safety, it supports animal weights up to 825 kg. The slatted floor has a cattle-friendly slot width, is claw-friendly and clean, and is chamfered in the edge area.

Single slatted floor 15.3/16

The Single Slatted Floor 15.3/16 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and slot widths of 2.5/3.0 and 3.5 cm, it is animal-friendly and claw-friendly. Especially suitable for renovations and refurbishments.

Cattle area grate 59.5/20

The Cattle Surface Grid 59.5/20 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high safety, it supports animal weights up to 825 kg. Suitable as a lying, walking, and standing area, it features a walk-friendly arrangement of slots.

Diagonal slatted floor

The Diagonal Slatted Floor 58/16 is suitable for young and large cattle. Manufactured according to DIN EN 12737, it offers a concrete strength of C 40/50. It allows for easy installation and supports animal weights up to 825 kg. Equipped with plastic spacers, a reinforced version is available upon request.

Twin floor

The Dual-Surface Floor, as a precast element for walkways in free-stall barns, offers a combined walking surface of concrete and rubber at the same height, with no joints. Designated rubber walkways and simultaneous claw wear on concrete ensure full contact of the claws, leading to even claw loading. The offset joints between the concrete floor and rubber mats prevent the scraper from tipping. An integrated groove for cable or chain pulls is included. Suitable for all level-surfaced walkways. Concrete strength C 40/50.

3-fold slatted floor 50/16

The 3-Fold Slatted Floor 50/16 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high stability, it supports animal weights up to 825 kg. Available for a total weight of up to 6 tons (up to length 370 cm, corresponding to 3 tons axle load). Track width 2.0 m; wheel contact area 0.30 x 0.20 m. Plastic spacers between the individual elements and a step width of 13.1 cm ensure high slip resistance.

3-fold slatted floor 50/20

The 3-Fold Slatted Floor 50/20 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50, it supports animal weights up to 825 kg. Available for a total weight of up to 8 tons (up to length 400 cm, corresponding to 5 tons axle load). The step width of 13.1 cm ensures high slip resistance.

4-fold slatted floor 60/16

The 4-Fold Slatted Floor 60/16 is designed for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and chamfered edges, it ensures high stability. The floor supports animal weights up to 825 kg and is loadable up to a total weight of 6 tons (corresponding to 3 tons axle load). With a height of 16 cm, it is suitable for rubber overlays. For drivable elements: track width 2.0 m, wheel contact area 0.30 x 0.20 m.

4-fold slatted floor 60/18

The 4-Fold Slatted Floor 60/18 is designed for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and chamfered edges, it ensures high stability. The floor supports animal weights up to 825 kg. It is suitable for rubber overlays. For drivable elements: track width 2.0 m, wheel contact area 0.30 x 0.20 m.

Twin slatted floor 35/16

The Twin Slatted Floor 35/16 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high safety, it supports animal weights up to 825 kg. The slatted floor has a cattle-friendly slot width, is claw-friendly and clean, and is chamfered in the edge area.

Twin slatted floor 32/16

The Twin Slatted Floor 32/16 is suitable for young and large cattle and complies with the current animal welfare guidelines. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high safety, it supports animal weights up to 825 kg. The slatted floor is claw-friendly, clean, and chamfered in the edge area. The load capacity is up to 6 tons total weight (corresponding to 3 tons axle load) with a height of 16 cm.

Single slatted floor 15.3/16

The Single Slatted Floor 15.3/16 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and slot widths of 2.5/3.0 and 3.5 cm, it is animal-friendly and claw-friendly. Especially suitable for renovations and refurbishments.

8-fold slatted floor 120/16

The 8-Fold Slatted Floor 120/18 is suitable for large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and a step width of 11.5 cm, it ensures high cleanliness. The slatted floor is chamfered in the edge area. Load capacity: up to 825 kg animal weight, drivable up to 6 tons total weight (corresponding to 3 tons axle load). It is suitable for rubber overlays. For drivable elements: track width 2.0 m; wheel contact area 0.30 x 0.20 m.

8-fold slatted floor 120/18

The 8-Fold Slatted Floor 120/18 is suitable for large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and a step width of 11.5 cm, it ensures high cleanliness. The slatted floor is chamfered in the edge area. Load capacity: up to 825 kg animal weight, drivable up to 8 tons total weight (corresponding to 4 tons axle load). It is suitable for rubber overlays. For drivable elements: track width 2.0 m; wheel contact area 0.30 x 0.20 m.

4-fold/8-fold slattet floor Typ KF

The 4-Fold/8-Fold Slatted Floor Type KF offers a combined walking surface of concrete and rubber at the same height. It is available with either one or two recesses for rubber inserts. The floor is claw-friendly and slip-resistant, with designated rubber walkways and simultaneous claw wear on concrete. Manufactured according to DIN EN 12737, it offers a concrete strength of C 40/50. Load capacity: up to 825 kg animal weight, drivable up to 6 tons total weight (corresponding to 3 tons axle load) and up to 8 tons total weight (corresponding to 4 tons axle load). For drivable elements: track width 2.0 m; wheel contact area 0.30 x 0.20 m. Other widths are available upon request.

4-fold floor (drivable)

The 4-Fold Floor (drivable) is specifically designed for calving areas and straw pens with a reduced slot percentage. Available in heights of 16 cm or 18 cm, width of 56.5 cm, and slot widths of 2.5 or 3.0 cm. Length ranges from 1.5 to 1.8 meters.

4-fold floor (drivable)

The 4-Fold Floor (drivable) is specifically designed for calving areas and straw pens with a reduced slot percentage. Available in heights of 16 cm or 18 cm, width of 56.5 cm, and slot widths of 2.5 or 3.0 cm. Length ranges from 1.9 to 2.4 meters.

4-fold floor (drivable)

The 4-Fold Floor (drivable) is specifically designed for calving areas and straw pens with a reduced slot percentage. Available in heights of 16 cm or 18 cm, width of 56.5 cm, and slot widths of 2.5 or 3.0 cm. Length ranges from 2.5 to 3.0 meters.

4-fold floor (drivable)

The 4-Fold Floor (drivable) is specifically designed for calving areas and straw pens with a reduced slot percentage. Available in heights of 16 cm or 18 cm, width of 56.5 cm, and slot widths of 2.5 or 3.0 cm. Length ranges from 3.1 to 3.7 meters.

Cattle area grate 59.5/20

The Cattle Surface Grid 59.5/20 is suitable for young and large cattle. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high safety, it supports animal weights up to 825 kg. Suitable as a lying, walking, and standing area, it features a walk-friendly arrangement of slots.

Area floor 10 tons - axle load - 50/20

The Surface Floor 50/20 is designed for an axle load of 10 tons. It offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and high stability, it comes with structural verification. Plastic spacers between the individual elements provide additional safety. The surface floor is also available as a solid plate and is suitable for feed tables as well as for covering channels for heavy traffic.

Diagonal slatted floor

The Diagonal Slatted Floor 58/16 is suitable for young and large cattle. Manufactured according to DIN EN 12737, it offers a concrete strength of C 40/50. It allows for easy installation and supports animal weights up to 825 kg. Equipped with plastic spacers, a reinforced version is available upon request.

4-fold combined floor type RM, 1 channel system

The 4-Fold Combination Floor Type RM with 1 Channel System offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and chamfered edges, the slatted floor provides high stability. It supports animal weights up to 825 kg and is drivable up to a total weight of 6 tons (corresponding to 3 tons axle load).

4-fold combined floor type RM, 2 channel system

The 4-Fold Combination Floor Type RM with 2 Channel System offers easy installation and is manufactured according to DIN EN 12737. With a concrete strength of C 40/50 and chamfered edges, the slatted floor provides high stability. It supports animal weights up to 825 kg and is drivable up to a total weight of 6 tons (corresponding to 3 tons axle load). For drivable elements, a track width of 2.0 m and a wheel contact area of 0.30 x 0.20 m apply.

Claw bath with diagonal grooves

The Claw Bath with Diagonal Grooves offers a concrete strength of C 40/50. It is equipped with a 100 mm drain nozzle on one side and is also available as a freestanding version upon request. Additionally, it features 4 stainless steel threaded sleeves (VA) and includes Centrilit NC to increase concrete density.

Concrete upstand / bow barrier

The Concrete Upstand / Neck Rail offers easy installation and comes with a V2A fastening kit. It has a concrete strength of C 40/50 and is suitable for both new and existing buildings (retrofittable).

Lying box partition

The Cubicle Divider offers easy installation and comes with a V2A fastening kit. It has a concrete strength of C 40/50 and is suitable for both new and existing buildings (retrofittable).

Concrete upstand (type NR)

The Concrete Upstand (Type NR) is designed for converting high cubicles to deep cubicles. It offers a concrete strength of C 40/50 and comes with a V2A fastening kit.

Reinforced concrete - beams

The Reinforced Concrete Girders for cattle slatted floors offer easy installation, a concrete strength of C 40/50, and high stability.

Reinforced concrete - beams

The Reinforced Concrete Girders for drivable cattle slatted floors (up to 3 tons axle load) offer easy installation, a concrete strength of C 40/50, and high stability.

precast elements

The Precast Elements for elevated cubicles offer easy installation and a concrete strength of C 40/50. They are equipped with an installation opening and are optionally available with threaded sleeves. The height is variable and can be adjusted as per agreement.

Lying area elements

The Lying Area Elements for deep litter cubicles are equipped with a cubicle boundary, a rear concrete upstand, and a front concrete base. They offer easy installation and have a concrete strength of C 40/50.

Installation trolley

The installation trolley is available as an accessory for cattle slats and can potentially be rented.

Installation traverse

The installation traverse is available as an accessory for cattle slats and can potentially be rented.

Rubber strips as underlay

The rubber strips as underlay are available as accessories for cattle slats.

Closed panel 40 cm

The solid plate with a width of 40 cm is suitable for pig slatted floors.

4-fold slatted floor 40 cm

The 4-Fold Slatted Floor with a width of 40 cm is suitable for pigs. Also available in a width of 33.3 cm. With continuous connection slots, it offers the highest level of cleanliness.

Closed panel 40 cm

The solid plate with a width of 40 cm is suitable for pig slatted floors.

5-fold piglet rearing grates 40 cm

The 5-Fold Piglet Rearing Slats with a width of 40 cm are suitable for pigs. With continuous connection slots, they offer the highest level of cleanliness. The non-slip and animal-friendly surface ensures safety and comfort. Statistically calculated and reinforced according to DIN EN 12737, concrete quality C40/50.

4-fold pigs slated floor 40 cm

The 4-Fold Pig Slatted Floor with a width of 40 cm is suitable for pigs. Also available in a width of 33.3 cm. With continuous connection slots, it offers the highest level of cleanliness.

Closed panel 40 cm

The solid plate with a width of 40 cm is suitable for pig slatted floors.

Reinforced concrete - beams

The Reinforced Concrete Girders for pig slatted floors offer easy installation, a concrete strength of C 40/50, and high stability.

Reinforced concrete - beams

The Reinforced Concrete Girders for gate valves offer easy installation, a concrete strength of C 40/50, and high stability.

Closed panel 40 cm

The solid plate with a width of 40 cm is suitable for pig slatted floors.

Installation trolley

The installation trolley is available as an accessory for pig slats and can potentially be rented.

Transport trolley

The transport trolley is available as an accessory for pig slats and can potentially be rented.

Rubber strips as underlay

The rubber strips as underlay are available as accessories for pig slats.

Large surface slab, standard slab

The large surface slab, standard slab, as a precast concrete element offers high stability through horizontal and vertical interlocking. Reinforcement is available upon request.

Large surface slab, half slab

The half slab as a precast concrete element offers high stability through horizontal and vertical interlocking. Reinforcement is available upon request.

Driveway panel

The road slab as a precast concrete element is cost-effective and easy to work with, even on softer substrates. Reinforcement is available upon request.

Large surface slab, standard slab

The large surface slab, standard slab, as a precast concrete element offers high stability through horizontal and vertical interlocking. Reinforcement is available upon request.

Large surface slab, half slab

The half slab as a precast concrete element offers high stability through horizontal and vertical interlocking. Reinforcement is available upon request.

Driveway panel

The road slab as a precast concrete element is cost-effective and easy to work with, even on softer substrates. Reinforcement is available upon request.

Fencing posts (rounded top), with strut

Fencing posts (rounded top), as fence posts

Ventilation floor type I 18-8

The Ventilation Floor Type I 18-8 is ideal for potato or onion storage and composting facilities. It offers a concrete strength of C 40/50 and can withstand loads up to 30 kN/m² and axle loads up to 10 tons. The slot percentage is up to approximately 9%. The floor is equipped with hard PVC spacers.

Container panel

The container slab as a precast concrete element for driveways is specifically designed for use in nurseries.

U-pieces grooved on both sides

Large surface slab, standard slab

The large surface slab, standard slab, as a precast concrete element offers high stability through horizontal and vertical interlocking. Reinforcement is available upon request.

Large surface slab, half slab

The half slab as a precast concrete element offers high stability through horizontal and vertical interlocking. Reinforcement is available upon request.

Driveway panel

The road slab as a precast concrete element is cost-effective and easy to work with, even on softer substrates. Reinforcement is available upon request.

Fencing posts (rounded top), with strut

Fencing posts (rounded top), as fence posts